nVIDIA | Mainboard Drivers and Utilities Drivers | Windows 98SE/ME/2000/XP | nForce System Utility

Device Driver Finder

Updates PC Audio Drivers

Never worry about audio device problems again.
Download official sound driver update tool.

Home | Categories | About Us | Blog | Contact Us

Driver Information

Manufacturer:	Netgear
Operating System:	Firmware
Version:	1.0.0_09.25
Release Date:	2006-10-19
Category:	Network Drivers
File Name and Size:	kwgr614_1_0_0_09_25na.bix(1.76 Mb)
Model:	NETGEAR KWGR614
Description:	NETGEAR KWGR614 Wireless Router Firmware 1.0.0_09.25. New Features: # Added the Dynamic L2TP support (in additional to the Static L2TP) for some ISP broadband accesses. # Added the feature to avoid LAN/WAN IP configuration conflict : this version can detect and avoid the installation problem automatically when the WAN side uses the conflicting IP address configuration as the LAN side. # The 1st release of the NA (Northern American) firmware compliant with the FCC requirement: the wireless region is fixed to US, and only channel 1~channel 11 selection allowed. The wireless radio is ON by default. The default Time Zone is US. # Intel ViiV certifiable: implemented the hidden page ( router-info.htm ) for the access of the Intel ViiV management software. # The 1st release of the WW (worldwide) firmware for EU, AU, etc (except US) # SIP ALG supported for VoIP applications # Added the system recovery capability: In case the flash image is damaged (because of improper or interrupted upgrade process, or bad firmware image programmed by the open source developers, etc), this version allows re-loading the firmware via TFTP. The procedure is: 1.Power off the unit; 2.Press and hold the RESET button at the rear panel; 3.Power on to reboot the unit; 4.Monitor the Test LED, and keep holding the RESET button until the Test LED changes from blinking to steady ON (which means the boot loader has entered the TFTP recovery mode); 5.Connect the PC to the LAN port of the unit; 6.Transmit the firmware image file to the unit: For Windows PC, enter the DOS command: tftp -i 192.168.1.1 PUT KWGR614_XXX.bix, For a Linux PC, use the command: tftp -m binary 192.168.1.1 -c put KWGR614_XXX.bix, where the 192.168.1.1 is the unit s LAN IP address and KWGR614_XXX.bix is the firmware image file to transmit; 7.Monitor the Test LED. When it starts blinking, the recovery procedure is complete; 8.Power cycle to reboot KWGR614, Repeat the above steps if the procedure is interrupted or failed. Known Issues: Video and Audio of ICQ5 connection cannot be established. Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with wired or Ethernet connection only. .
Download Link:	Want this driver? Download DriverFinder to get the most updated drivers for your PC! By choosing to install DriverFinder (264KB), I consent to the End User License Agreement and Privacy Policy of it's site.

	Technology News

	Recommended Download!
	Get Instant Access to Unlimited Drivers! DriverFinder is an advanced driver scanning, updating and downloading utility for Windows-based PCs. Individual drivers may be available by manually visiting device manufacturer websites.

	New Blog Posts!
	Windows 11 BSOD Repair Windows Code 22 Error Dell DBUtil driver bug How to Disable Automatic Driver Updates in Windows 10 How to Disable Automatic Driver Updates in Vista/Windows 7

	Free Driver Download
	RealTek - AC97 Audio Codecs Driver