NETGEAR WGT624v3 or WGT624SC Super G Wireless Router Firmware 1.0.128_1.0.1.
New Features:
# Adds WPA-PSK/WPA2-PSK mixed-mode support. I.e., router can now support one adapter using one, while another uses the other.
Bug Fixes:
# Changing LAN IP from de
Description:
NETGEAR WGT624v3 or WGT624SC Super G Wireless Router Firmware 1.0.128_1.0.1.
New Features:
# Adds WPA-PSK/WPA2-PSK mixed-mode support. I.e., router can now support one adapter using one, while another uses the other.
Bug Fixes:
# Changing LAN IP from default settings to 10.0.0.1/255.0.0.0 used to cause router malfunction.
# UPnP parser error caused router crash. The application Azureus asked to create 3 ports, but the format caused system crash while parsing the UPnP message.
# SSID name previously left out repetitive space key value when the router boots. Example: "A B" (A space space B) would be stored as "A B" (A space B).
# LAN scope used to work improperly. In "LAN IP Setup" page. If you changed the device IP to"192.168.0.1/255.255.0.0", and changed DHCP server range to "192.168.1.2 -192.168.1.254", it would not work.
# Web console??s password would not accept space characters.
# Intermittently, after reseting and power cycling, the Web-based GUI wouldn't work.
# RIP-2M did not get routing table.
# Fixed that adding/removing user account caused router reboot and action failure.
# When Connect as Required is enabled and the router is set to PPPOE or BigPond, it used to stay at connect status, even if the idle time elapsed.
# When enabled DMZ feature, the WAN PC couldn't access the Apache HTTP server On the DMZ server.
# WPA-PSK no longer fails in certain situations.
# Regional wireless settings were updated.
.
DriverFinder is an advanced driver scanning, updating and downloading utility for Windows-based PCs. Individual drivers may be available by manually visiting device manufacturer websites.